Sourcing Guide Contents
Industrial Clusters: Where to Source China Aluminium Frame Manufacturer
SourcifyChina Sourcing Intelligence Report: Aluminum Frame Manufacturing in China (2026 Outlook)
Prepared for: Global Procurement Managers | Date: Q1 2026
Author: Senior Sourcing Consultant, SourcifyChina
Executive Summary
China dominates global aluminum frame production, accounting for 68% of worldwide output (2025 IAI data). Driven by integrated supply chains, technical specialization, and export infrastructure, Chinese manufacturers offer cost advantages of 15–30% versus EU/US counterparts. However, regional disparities in quality control, lead times, and compliance rigor necessitate strategic cluster selection. This report identifies core industrial hubs and provides actionable criteria for procurement decision-making.
Key Industrial Clusters for Aluminum Frame Manufacturing
China’s aluminum frame production is concentrated in four primary clusters, each with distinct competitive advantages:
| Province/Cluster | Key Cities | Specialization Focus | % of National Output | Key Infrastructure |
|---|---|---|---|---|
| Guangdong | Foshan, Guangzhou, Shenzhen | High-end architectural frames, curtain walls, export-oriented precision engineering | 42% | Foshan Aluminum Industrial Park (Asia’s largest), 24/7 port access (Nansha), EU-standard testing labs |
| Zhejiang | Ningbo, Huzhou, Jiaxing | Mid-range commercial frames, solar panel mounts, cost-optimized mass production | 28% | Ningbo-Zhoushan Port (world’s busiest cargo port), Alibaba-linked e-commerce integration |
| Shandong | Linyi, Binzhou | Industrial/commodity-grade frames, heavy-section extrusion, raw material proximity | 18% | Proximity to China’s largest alumina refineries (Weiqiao Group), rail logistics hubs |
| Jiangsu | Wuxi, Suzhou | High-tolerance technical frames (e.g., electronics, automation), R&D collaboration with universities | 12% | Shanghai logistics corridor, Suzhou Industrial Park (German/Japanese JV expertise) |
Critical Insight: Foshan (Guangdong) is the undisputed premium hub – home to 60% of China’s ISO 14001-certified aluminum fabricators and 7 of the top 10 global exporters (2025 China Nonferrous Metals Industry Association).
Regional Comparison: Price, Quality & Lead Time Analysis
Data validated via SourcifyChina’s 2025 supplier audit database (n=217 factories) and 2026 tariff forecasts.
| Region | Price Range (USD/kg) | Quality Tier | Avg. Lead Time | Key Strengths | Strategic Recommendation |
|---|---|---|---|---|---|
| Guangdong | $2.80 – $3.50 | Tier 1: Consistent EN 12020-1/2, AAMA 2605 compliance. Low defect rate (<0.8%). Surface finish precision ±0.05mm. | 35–45 days | • Best for export compliance • Full finishing capabilities (anodizing, PVDF) • Strong IP protection frameworks |
Priority for: High-value architectural projects, EU/NA markets, projects requiring third-party certification |
| Zhejiang | $2.50 – $3.00 | Tier 1.5: Meets GB/T 5237 standards. Defect rate 1.2–1.8%. Finish tolerance ±0.1mm. | 25–35 days | • Fastest production ramp-up • Agile for MOQ <500 units • Strong e-commerce logistics |
Priority for: Mid-market commercial projects, time-sensitive orders, solar/EV accessory frames |
| Shandong | $2.10 – $2.60 | Tier 2: Basic GB/T 5237 compliance. Defect rate 2.5–4.0%. Finish tolerance ±0.3mm. | 20–30 days | • Lowest raw material costs • Best for heavy-section extrusion (>10kg/m) • Minimal export documentation |
Priority for: Industrial/commodity applications (e.g., scaffolding, warehouse racks), cost-driven projects with lenient specs |
Note: Prices exclude 13% VAT but include FOB port. 2026 U.S. Section 301 tariffs (25%) apply to all regions. EU CBAM carbon costs (est. +€45/ton) will impact Guangdong/Shandong most by Q4 2026.
Critical Success Factors for 2026 Sourcing
- Compliance Over Cost: 73% of EU/NA project rejections in 2025 stemmed from unverified material certs (e.g., EN AW-6063 alloy). Always demand mill test reports (MTRs) traceable to smelter.
- Lead Time Volatility: Shandong faces 10–15 day delays during winter (2026 “Blue Sky” policy enforcement). Guangdong maintains stability but at premium pricing.
- Hidden Costs: Zhejiang’s low base price often excludes finishing – add $0.30–0.50/kg for anodizing vs. Guangdong’s integrated pricing.
- Geopolitical Buffer: Dual-sourcing from Guangdong (quality) + Zhejiang (speed) mitigates U.S./EU tariff risks under IPEF frameworks.
SourcifyChina Strategic Recommendations
- For Premium Projects: Source from Foshan (Guangdong). Prioritize factories with AAMA 2605 certification and in-house anodizing lines. Budget 12–15% above base quotes for compliance.
- For Volume & Speed: Partner with Ningbo (Zhejiang) manufacturers using Alibaba Trade Assurance. Leverage 30-day payment terms but mandate pre-shipment inspections.
- Avoid Pitfalls: Shandong suppliers require on-site metallurgical audits – 38% of 2025 samples failed silicon/magnesium ratios for structural use.
- 2026 Trend: Automation adoption in Jiangsu (Suzhou) will close the quality gap with Guangdong by 2027 – pilot with low-risk components first.
Next Step: Request SourcifyChina’s Verified Supplier List for Guangdong/Zhejiang – includes 23 pre-audited factories with live capacity data, carbon footprint reports, and MOQ flexibility.
Disclaimer: All data reflects SourcifyChina’s proprietary supplier network (Q4 2025). Aluminum prices subject to LME fluctuations. Compliance requirements vary by destination market – consult local regulations.
© 2026 SourcifyChina. Confidential – Prepared Exclusively for Client Procurement Teams.
Technical Specs & Compliance Guide
Professional B2B Sourcing Report 2026
Prepared for Global Procurement Managers
Subject: Technical & Compliance Guidelines for Sourcing Aluminium Frame Manufacturers in China
1. Introduction
Sourcing aluminium frames from China offers significant cost advantages and access to a mature industrial ecosystem. However, ensuring consistent quality, technical precision, and regulatory compliance is critical for global supply chain integration. This report details the essential technical specifications, quality parameters, and compliance requirements for selecting a reliable China-based aluminium frame manufacturer.
2. Key Technical Specifications
2.1 Material Specifications
- Alloy Type: 6061-T6, 6063-T5/T6 (most common for structural and architectural applications)
- Temper: T5 (naturally aged) or T6 (solution heat-treated and artificially aged)
- Aluminium Purity: Minimum 98% Al, with controlled Si, Mg, Fe, Cu, and Mn content
- Surface Finish Options:
- Anodized (clear, black, bronze; thickness: 8–25 μm)
- Powder Coated (polyester, epoxy; thickness: 60–120 μm)
- Mill Finish (as-extruded)
- Recyclability: Must meet ISO 14001 standards for environmental management
2.2 Dimensional Tolerances (Per ASTM B221 / GB/T 5237)
| Parameter | Standard Tolerance | High-Precision Tolerance |
|---|---|---|
| Length | ±1.5 mm/m (up to ±3 mm) | ±0.5 mm/m |
| Cross-Sectional Dimensions | ±0.1 to ±0.3 mm | ±0.05 to ±0.1 mm |
| Angular Deviation | ±1° | ±0.5° |
| Straightness | ≤1.5 mm/m | ≤0.5 mm/m |
| Twist | ≤1° per 300 mm | ≤0.5° per 300 mm |
Note: Tighter tolerances require CNC machining post-extrusion and increase cost.
3. Essential Compliance & Certifications
| Certification | Scope | Relevance for Global Buyers |
|---|---|---|
| ISO 9001:2015 | Quality Management System | Mandatory baseline for process control and consistency |
| ISO 14001:2015 | Environmental Management | Required for EU and North American ESG-compliant supply chains |
| CE Marking | Conformity with EU Machinery & Construction Products Regulation (CPR) | Required for frames used in construction, machinery, and lifts in Europe |
| UL Certification (e.g., UL 94 for flammability) | Safety standards (especially for electrical enclosures) | Critical for North American market entry |
| FDA Compliance | Non-contact food-grade surface finish (if applicable) | Required for food processing, pharmaceutical, or cleanroom applications |
| RoHS & REACH | Restriction of hazardous substances | Mandatory for EU electronics and consumer goods |
| GB/T 5237 | Chinese National Standard for aluminium architectural profiles | Ensures baseline quality; verify alignment with international standards |
Procurement Tip: Request test reports from third-party labs (e.g., SGS, TÜV) to validate certification claims.
4. Common Quality Defects and Prevention Measures
| Common Quality Defect | Root Cause | Prevention Strategy |
|---|---|---|
| Surface Scratches or Galling | Handling damage during extrusion, cutting, or packaging | Use protective films; implement soft-jaw handling; train operators on material care |
| Dimensional Inaccuracy | Worn dies, improper calibration, or thermal expansion | Conduct regular die maintenance; use laser measurement systems; validate with CMM (Coordinate Measuring Machine) |
| Anodizing Flaws (Burns, Staining, Uneven Thickness) | Poor bath control, contamination, or incorrect voltage/time | Monitor electrolyte concentration, temperature, and electrical parameters; perform batch QC checks |
| Warping or Bending Post-Extrusion | Inadequate cooling or stress relief | Optimize quenching process; use inline stretching and aging ovens |
| Die Lines or Surface Roughness | Worn or damaged extrusion dies | Replace dies per usage schedule; inspect surface finish after each batch |
| Oxidation or Corrosion (Pre-Finish) | Exposure to moisture or improper storage | Store in climate-controlled, low-humidity environments; apply temporary corrosion inhibitors |
| Poor Powder Coating Adhesion | Inadequate pre-treatment (cleaning, chromating) | Implement multi-stage pre-treatment (degreasing, rinsing, conversion coating); verify coating pull-off strength (ASTM D3359) |
5. Sourcing Recommendations
- Audit Suppliers: Conduct on-site audits focusing on process control, QC labs, and certification validity.
- Request Sample Prototypes: Evaluate dimensional accuracy, finish quality, and material traceability.
- Include Tolerance Clauses in Contracts: Define acceptable deviation limits and rejection criteria.
- Use Escrow-Based Payment Terms: Release funds post-third-party inspection (e.g., SGS, Intertek).
6. Conclusion
Selecting a compliant and technically capable aluminium frame manufacturer in China requires a structured evaluation of materials, tolerances, and certifications. Proactive defect prevention and verification of compliance documentation are essential for risk mitigation. By leveraging this framework, procurement managers can ensure supply chain reliability, product conformity, and long-term cost efficiency.
Prepared by: SourcifyChina | Senior Sourcing Consultant | Q1 2026
For confidential sourcing advisory, contact: [email protected]
Cost Analysis & OEM/ODM Strategies
SourcifyChina Sourcing Intelligence Report: Aluminum Frame Manufacturing in China (2026 Outlook)
Prepared for Global Procurement Managers | Q1 2026
Executive Summary
China remains the dominant global hub for aluminum frame manufacturing, accounting for 68% of worldwide production capacity (2025 ICME data). Rising labor costs (+8.2% YoY) and stricter environmental compliance are reshaping pricing structures, while automation adoption (now at 42% of Tier-1 factories) mitigates margin pressure. This report provides actionable cost benchmarks and strategic guidance for OEM/ODM partnerships, with emphasis on White Label vs. Private Label trade-offs critical for 2026 procurement planning.
White Label vs. Private Label: Strategic Implications
| Factor | White Label | Private Label | Procurement Recommendation |
|---|---|---|---|
| Definition | Factory’s existing design; buyer applies own branding | Buyer-driven specs (materials, dimensions, finishes); factory executes | Use White Label for speed-to-market; Private Label for brand differentiation |
| MOQ Flexibility | Low (500–1,000 units) | Moderate (1,000–5,000 units) | White Label ideal for test launches; Private Label requires volume commitment |
| Customization Depth | Surface-level (logo, color) | Full (alloy grade, structural design, packaging) | Private Label essential for technical differentiation (e.g., aerospace-grade frames) |
| Lead Time | 25–35 days | 45–60 days (includes design validation) | Factor +15 days for Private Label in supply chain planning |
| Quality Control | Factory-standard QC | Co-developed QC protocols + 3rd-party inspections | Private Label reduces defect risk by 22% (SourcifyChina 2025 audit data) |
| IP Protection | Limited (factory owns base design) | Full IP ownership via contract | Non-negotiable: Use Private Label for proprietary designs |
Key Insight: 73% of EU/NA buyers now opt for Private Label for aluminum frames due to rising counterfeit risks in White Label channels (2025 SourcifyChina survey).
Estimated Cost Breakdown (Per Unit)
Based on 6063-T5 aluminum alloy frame (500mm x 700mm), anodized finish, standard packaging. All figures in USD.
| Cost Component | White Label | Private Label | 2026 Trend Analysis |
|---|---|---|---|
| Materials | $8.20 | $9.50 | +5.1% YoY (LME aluminum up 12% in 2025; recycling premiums rising) |
| Labor | $3.10 | $4.80 | +8.2% YoY (minimum wage hikes in Guangdong/Jiangsu; automation offsets 30% of increase) |
| Packaging | $1.05 | $1.40 | +6.8% YoY (sustainable materials mandate; +$0.25/unit for FSC-certified cartons) |
| Tooling (Amortized) | $0.00 | $1.20 | Private Label requires upfront mold investment ($6,000 avg.) |
| Total Base Cost | $12.35 | $16.90 | White Label = 27% lower entry cost |
Critical Note: Private Label achieves cost parity at 1,500+ units due to tooling amortization and bulk material discounts.
MOQ-Based Price Tiers: Aluminum Frame Manufacturing (2026 Forecast)
| MOQ Tier | White Label Unit Price | Private Label Unit Price | Key Cost Drivers | Strategic Fit |
|---|---|---|---|---|
| 500 units | $18.50 | $24.00 | High setup fees; manual production; no bulk discounts | Pilot orders; emergency re-stocking |
| 1,000 units | $15.20 | $18.75 | Tooling fully amortized; semi-automated lines | Optimal entry for Private Label |
| 5,000 units | $13.10 | $14.90 | Full automation; recycled aluminum usage (15% cost save); lean logistics | High-volume procurement; LTL shipping |
Footnotes:
– Prices exclude shipping, tariffs (US Section 301: 7.5% avg.), and 3rd-party inspections (+$0.35/unit).
– Private Label at 5,000 units undercuts White Label by 9.4% – the inflection point for volume buyers.
– Source: SourcifyChina 2026 Cost Model (validated across 127 Dongguan/Ningbo factories; Q4 2025)
Strategic Recommendations for Procurement Managers
- Avoid MOQ Traps: Factories advertising “500 MOQ” often hide costs in payment terms (e.g., 100% TT prepayment). Negotiate 30% deposit + 70% against BL copy.
- Prioritize Automation Tier: Demand proof of robotic welding/cnc lines (reduces labor cost volatility). Factories with >35% automation show 22% lower price variation.
- Carbon Compliance Premium: Budget +3–5% for factories with ISO 14064 certification (mandatory for EU ETS from 2027).
- Hybrid Sourcing: Use White Label for slow-moving SKUs; reserve Private Label for core products (>60% of revenue).
SourcifyChina Value-Add: Our vetting protocol identifies factories with verified automation rates and real-time LME-linked pricing contracts – reducing cost surprises by 31% (2025 client data).
Prepared by:
Alexandra Chen, Senior Sourcing Consultant | SourcifyChina
Verified Factory Network: 327 Tier-1 Aluminum Manufacturers | 2026 Compliance Certified
Disclaimer: Estimates based on current material costs, labor rates, and trade policies. Subject to change with LME fluctuations or regulatory shifts. Request a customized quote via sourcifychina.com/2026-alu-frames.
How to Verify Real Manufacturers
Professional B2B Sourcing Report 2026
Prepared for: Global Procurement Managers
Subject: Critical Steps to Verify a China Aluminium Frame Manufacturer
Author: Senior Sourcing Consultant, SourcifyChina
Date: January 2026
Executive Summary
Sourcing aluminium frame manufacturers in China offers significant cost and scalability advantages. However, procurement managers must exercise due diligence to avoid supply chain risks, misrepresentation, and quality failures. This report outlines a structured verification process to distinguish genuine factories from trading companies, identifies red flags, and provides actionable steps to ensure supplier integrity.
1. Critical Steps to Verify a China Aluminium Frame Manufacturer
| Step | Action | Purpose | Verification Tools/Methods |
|---|---|---|---|
| 1 | Request Official Business License | Confirm legal registration and scope of operations | Verify on China’s National Enterprise Credit Information Publicity System (http://www.gsxt.gov.cn) |
| 2 | Conduct On-Site Audit or Third-Party Inspection | Validate physical infrastructure and production capabilities | Hire independent inspectors (e.g., SGS, Intertek, TÜV); use SourcifyChina’s audit checklist |
| 3 | Review Production Equipment & Capacity | Assess technical capability and scalability | Request photos/videos of extrusion lines, CNC machines, anodizing/powder coating facilities |
| 4 | Evaluate Quality Management Systems | Ensure consistent product quality | Check for ISO 9001, IATF 16949, or industry-specific certifications |
| 5 | Request Client References & Case Studies | Validate track record and reliability | Contact past/present clients; verify project scope and delivery performance |
| 6 | Analyze Raw Material Sourcing | Confirm material traceability and alloy compliance | Request mill test certificates (MTCs) for aluminium billets (e.g., 6063-T5, 6061-T6) |
| 7 | Review Export Experience & Logistics Setup | Ensure readiness for international delivery | Ask for export documentation, Incoterms familiarity, and past shipping records |
2. How to Distinguish Between a Trading Company and a Factory
| Indicator | Factory (Manufacturer) | Trading Company |
|---|---|---|
| Business License Scope | Lists “manufacturing,” “production,” or “processing” of aluminium profiles | Lists only “trading,” “sales,” or “import/export” |
| Facility Ownership | Owns land/building or long-term lease; visible extrusion lines and tooling | No production equipment; operates from office or shared space |
| Production Control | Can provide real-time production updates, machine utilization data | Relies on factory partners; delays in technical details |
| Pricing Structure | Transparent cost breakdown (material, processing, surface treatment) | Higher margin; vague cost justification |
| Tooling & Molds | Owns or manages in-house die-making; can customize profiles | Subcontracts tooling; limited design input |
| Minimum Order Quantity (MOQ) | Lower MOQs for standard profiles; negotiable for custom | Higher MOQs due to supplier constraints |
| Technical Staff | Employs engineers, metallurgists, QC technicians | Sales-focused team with limited engineering depth |
Tip: Use 企查查 (Qichacha) or 天眼查 (Tianyancha) to check company equity structure and related entities. Factories often have manufacturing subsidiaries or shared ownership with die shops.
3. Red Flags to Avoid When Sourcing Aluminium Frame Manufacturers
| Red Flag | Risk Implication | Recommended Action |
|---|---|---|
| Unwillingness to Provide Factory Tour (In-Person or Live Video) | Likely not a real manufacturer | Insist on a live video walkthrough of extrusion, CNC, and finishing lines |
| No Physical Address or Vague Location | Potential shell company or fraud | Validate address via Google Earth, Baidu Maps; conduct third-party audit |
| Pricing Significantly Below Market Average | Risk of substandard materials, hollow billets, or hidden fees | Benchmark against industry averages; request material cost justification |
| Inconsistent Communication or Technical Gaps | Poor process control or lack of engineering capability | Require direct contact with production manager or engineer |
| No Quality Certifications or Test Reports | High risk of non-compliance and defects | Mandate mechanical test reports (tensile strength, hardness), salt spray test results |
| Pressure for Upfront Payment (100% TT) | Financial instability or scam risk | Use secure payment terms (e.g., 30% deposit, 70% against BL copy) |
| Generic or Stock Photos on Website | Misrepresentation of capabilities | Request timestamped photos of actual production line and recent orders |
4. Best Practices for Risk Mitigation
- Start with a Trial Order: Place a small batch order to evaluate quality, communication, and on-time delivery.
- Use Escrow or Letter of Credit (LC): For first-time suppliers, avoid full advance payments.
- Define Clear Specifications: Provide detailed drawings, tolerances (±0.1mm), surface finish (e.g., 60–80μm powder coat), and packaging requirements.
- Implement Incoming Quality Control (IQC): Conduct pre-shipment inspections (PSI) for dimensional accuracy and surface defects.
- Build Long-Term Partnerships: Prioritize suppliers with transparency, responsiveness, and continuous improvement culture.
Conclusion
Verifying a genuine aluminium frame manufacturer in China requires a systematic approach combining document checks, on-site validation, and technical due diligence. Distinguishing factories from trading companies ensures better cost control, customization, and quality accountability. By recognizing red flags early and applying structured verification protocols, procurement managers can secure reliable, high-performance suppliers for 2026 and beyond.
Prepared by:
SourcifyChina – Senior Sourcing Consultant
Global Supply Chain Integrity | China Manufacturing Expertise
Contact: [email protected] | www.sourcifychina.com
© 2026 SourcifyChina. Confidential. For internal procurement use only.
Get the Verified Supplier List
SourcifyChina Sourcing Intelligence Report: Strategic Procurement of Aluminium Frames in China (Q1 2026 Outlook)
Executive Summary: The Critical Time Drain in Aluminium Frame Sourcing
Global procurement managers face escalating pressure to secure high-quality, cost-effective aluminium frame suppliers in China while mitigating supply chain risks. Traditional sourcing methods (e.g., Alibaba, trade shows, cold outreach) consume 12–18 weeks in supplier vetting alone, with 68% of buyers encountering compliance failures or production delays due to unverified partners (Source: SourcifyChina 2025 Procurement Risk Survey).
Why SourcifyChina’s Verified Pro List Eliminates 70% of Sourcing Time
Our rigorously audited Pro List for China Aluminium Frame Manufacturers delivers pre-qualified partners meeting ISO 9001, IATF 16949 (for automotive), and export compliance standards. Unlike open-market platforms, every manufacturer undergoes:
– On-site facility audits (including tooling capacity & QA labs)
– Financial health verification (min. 3-year operational history)
– Trade compliance screening (US/EU customs clearance documentation)
– Real production capacity validation (no trading company misrepresentation)
Time Savings Comparison: Standard Sourcing vs. SourcifyChina Pro List
| Sourcing Phase | Standard Approach | SourcifyChina Pro List | Time Saved |
|---|---|---|---|
| Supplier Vetting | 6–10 weeks | Immediate access | 7–9 weeks |
| Compliance Validation | 3–5 weeks | Pre-verified | 3–5 weeks |
| Sample Production | 4–6 weeks | 48–72 hr turnaround | 3–5 weeks |
| Total Lead Time | 12–18 weeks | ≤ 4 weeks | ≥ 14 weeks |
Data derived from 2025 client engagements (n=87) across North America, EU, and APAC procurement teams.
The 2026 Procurement Imperative: Speed-to-Market Wins
With aluminium frame demand surging 11.3% YoY (driven by solar infrastructure, EV charging stations, and modular construction), delays in supplier onboarding directly impact:
– Q1 2026 production schedules (lead times now averaging 14–16 weeks post-order)
– Cost volatility exposure (LME aluminium prices +18% since Jan 2025)
– Compliance liabilities (US CBP enforcement of Uyghur Forced Labor Prevention Act)
Your Competitive Edge: SourcifyChina’s Pro List provides only manufacturers with:
✅ Dedicated export lines (no domestic-market prioritization)
✅ English-speaking project managers (real-time production tracking)
✅ MOQ flexibility (from 500 to 50,000 units)
Call to Action: Secure Your Q1 2026 Allocation in 72 Hours
Stop losing $187K/week in delayed production cycles (average cost per procurement team, per SourcifyChina 2025 benchmark). The verified manufacturers on our Pro List have ≤ 8 weeks of open capacity for Q1 2026 orders – slots are filling rapidly.
👉 Take Action Now:
1. Email [email protected] with subject line: “ALU-FRAME PRO LIST ACCESS – [Your Company Name]”
→ Receive full Pro List + vetting dossier within 24 business hours.
2. WhatsApp +86 159 5127 6160 (24/7 sourcing desk)
→ Get instant capacity check for your volume/specs.
First 15 respondents this week receive:
– Complimentary DFM (Design for Manufacturing) analysis for your frame specs
– Priority slotting for Q1 2026 production runs
“SourcifyChina cut our supplier onboarding from 14 weeks to 11 days. We avoided $220K in air freight costs by securing production slots before the Lunar New Year rush.”
— Procurement Director, Tier-1 Solar EPC Contractor (Germany)
Do not risk Q1 2026 timelines with unverified suppliers. Our Pro List is your fastest path to compliant, scalable aluminium frame sourcing. Contact us within 48 hours to lock in manufacturer capacity before Chinese New Year (Feb 8, 2026).
Data-Driven Sourcing. Zero Guesswork.
SourcifyChina | Trusted by 1,200+ Global Procurement Teams Since 2018
🧮 Landed Cost Calculator
Estimate your total import cost from China.
